Aquarium Heater for Fish Tanks

Before using the product, users should verify that the power supply voltage matches the rated voltage. For glass heaters, it is crucial to carefully inspect for any damaged parts prior to installation. Damaged cords or cracks should be reported, and the heater should not be used in such cases.

The IPX8 design of this heater is non-detachable, and it should not be disassembled, as doing so may damage the unit. The heater must be fully submerged in water before being plugged in. After unplugging the heater, users should wait at least 10 minutes before changing the water or removing the heater from the water. It is forbidden to remove the heater immediately after unplugging.

Burying the heater under sand is not recommended.

For optimal heat distribution in the aquarium, it is advised to place the heater in an area with good water circulation. The aquarium temperature may fluctuate depending on the ambient room temperature, and variations of up to ±3°F are considered normal. If the room temperature is below 60°F, a more powerful heater than the recommended model may be necessary.

To avoid injury, users should not touch the heating part of the heater directly.

This 50W aquarium heater is recommended for fish tanks ranging from 5 to 15 gallons. The heater length is 6.75 inches, and the power cord is 3.6 feet long, with a voltage of 110V/60Hz.

An easy-to-access dial on the top of the heater allows for convenient adjustment of the water temperature from 65°F to 89°F. The red light automatically shuts off when the target temperature is reached, and the heater then maintains a constant temperature in the marine or freshwater aquarium.

The package includes the 50W small aquarium heater, two suction cups, and a thermometer strip.

As a safety precaution, the heater must always be kept fully submerged in water before being plugged in. After unplugging the heater, users should wait at least 10 minutes before performing any aquarium maintenance or removing the heater from the water.

product information: